:: 16 мая, понедельник ::
Корзина пока пуста
КОНТАКТЫ Санкт-Петербург,
ул.Софийская, д.54



Skype: dometicru


Аксессуары для видеосистем

Accessories for video systems – just in case

WAECO PerfectView SWITCH 300

More cameras – simply added to the circuit

Using the switchbox you can connect up to three cameras to one monitor and control them individually! PerfectView SWITCH 300 is compatible with almost any WAECO camera. The cameras can be activated either automatically or manually (e.g. the reversing camera via reverse gear, the side-mounted cameras via the indicator).

  • Switchbox for running up to 3 independently controlled cameras from one monitor camera input
  • Cameras can be activated either automatically or manually (e.g. rear-view camera via reverse gear, side-mountedcameras via indicators)
  • Power consumption: 0.84 watts max. (without cameras)
  • Suitable for 12- and 24-volt vehicle electrics


Monitor with 2 cameras

The LCD monitor M 7L has two camera inputs – e.g. for connection of a rear-view camera and a front camera.

Turning 2 into 4 with PerfectView SWITCH

The same monitor, thanks to the switchbox, now with up to four cameras: for example, a reversing camera, two side cameras (one each left and right), and an additional camera to monitor the working area.


WAECO PerfectView VS 400

Video splitter for up to 4 cameras

Functions: full screen, split mode, picture-in-picture, or quad mode

  • Shows the video images from up to 4 connected cameras on 1 monitor
  • Automatic mode and camera runtimes can be set
  • Cameras can be programmed separately; automatic storage of the last setting
  • Distance marks for camera 1


WAECO PerfectView REC 400

Digital video recorder

The PerfectView REC 400 video recorder is used for recording video footage in vehicles. The video recorder transmits and saves recordings from up to four cameras. You can view the video recordings directly using the monitor connected in the vehicle, or on a PC. The video recorder features an acceleration sensor which logs all vehicle movements and saves this information together with the video data. Up to four signal generators can be connected to the alarm inputs (e.g. light barriers, movement sensors, switches). When a signal is triggered at the alarm input, the camera channel assigned to it is displayed.

WAECO PerfectView REC 400

  • Digital video recorder for video and audio signal recordings
  • Compact design, fanless
  • 4 camera input
  • Integrated accelation sensor
  • Position determination by integrated GPS receiver
  • Alarm event control
  • Storage on SD card (not included)
  • PAL and NTSC compatible
  • Resolution up to 720 x 576 pixels
  • Recording time up to 70 hours (CIF, 15 fps, 64 GB SD card)
  • Recording management over PC or internal menu


WAECO PerfectView Easylink


Vehicle change easy done!

The Easylink monitor mount: Ideal when the monitor is used in several vehicles, convenient solution for the anti-theft protection.

Waeco PerfectView accessories

Mounting aid for camera CAM16 to be fitted in place of the 3rd brake light (3rd brake light is then mounted on it) - specific to FIAT Ducato!



WAECO PerfectView VT 100DIG

Digital wireless video/audio link

  • Interference-free transmission
  • Transmission distance up to 120 m (free sight)
  • Reception latency below 200 ms
  • Picture rate up to 30 fps
  • Simultaneous operation of up to 6 radio links possible
  • IP 65 water resistant


создание сайта: студия сайтио